Geometric Measurement
Geometric measurement technology spans an extremely wide field. From relatively simple straightness measurements of a member to considerably more complicated right-angle measurements of machine tools and checks of turbines for power generation. The Easy-Laser® systems are excellent for taking all these types of measurements quickly and easily. The universal and intelligent design gives you many application possibilities, because the laser transmitter and detectors are designed to be twisted, turned and mounted in all possible and impossible ways.
E980 Sawmill
The Easy-Laser® E980 Sawmill system will help you increase efficiency and save money in your sawmill. The system measures straightness, flatness and squareness. Simple to use, even for your own maintenance and production staff. Equally useful on band saws and circular saws.
Benefits of using Easy-Laser E980 are:
- Higher production speed
- Less unplanned downtime
- Better product quality
- Longer lifetime for blades
- Longer lifetime for bearings
- Less vibration
- Less waste material
E975 Roll alignment
System E975 is designed mainly for roll alignment. It is well suited when just one or two rolls are to be replaced or adjusted at the same time. Because the system is so quick to set up on the machine even a short planned production stop can be utilized to measure a roll, and maybe replace or adjust it.
- Keep the maintenance and service work in-house.
- Even short stoppages can be utilized.
- Easier to use than traditional methods such as theodolites.
- A cost efficient solution for any company.
- PDF documentation can be produced directly on site.
- Ensures the quality of produced material.
- Keeps maintenance costs down and extends the service life of wear parts.
E970 Parallelism
For parallelism measurement of rolls and other objects in numerous applications. The E970 is especially suitable when many objects are to be measured and aligned, and when the distances are long. Any chosen object or the baseline can be used as a reference.
- For traditional parallelism measurement with angular prism.
- Especially suitable when many objects are to be measured and aligned.
- For machines up to 80 m (40 m+40 m).
- Also measures level and flatness of suction boxes and foundations.
E960 Turbine alignment
The Turbine system comes in two versions. Easy-Laser® E960-A suitable for gas turbines and smaller steam turbines, and Easy-Laser® E960-B for larger turbines.
- Add, remove and remeasure measurement points.
- Measures both full bores and half bores.
- Multi-point measurement.
- Bore ovality measurement.
- Calculate waviness (short and long) and best-fit.
E950 Bore alignment
Easy-Laser® E950 makes the control and adjustment work of bearings easier because of the wireless detector unit and measurement programs that guide you through the measurement process. All of the parts included in the systems are designed and built even for the most demanding workplace and for easy setup on a machinery.
- Add, remove and remeasure measurement points.
- Measures both full bores and half bores.
- Multi-point measurement.
- Bore ovality measurement.
- Calculate waviness (short and long) and best-fit.
E930 Extruder
Easy-Laser® E930 is designed to measure straightness and pointing direction, primarily on extruder pipes. Another application are the hydraulic pipes, for instance.
An aligned extrusion machine leads to:
- Less wear on the extruder screw and tube.
- Even quality on the produced material.
- Lower energy consumption.
- Lower consumption of spare parts.
- Increased availability on machine time.
E920 Geometric
Easy-Laser® E920 is a complete system in itself, with laser transmitter, detector and display unit. But it is also an excellent starting point for creating a measurement system that suits your specific needs and requirements, because all the measurement programs are included as standard.
- Complete geometric system with laser transmitter, detector and display unit.
- Includes all our measurement programs.
- Wireless connection enables you to work more freely.
- Program that guides you through the measuring procedure speeds up work.
- Expandable with the rest of the Easy-Laser® E-series range.
E915 Flange spin
Easy-Laser® E915 is a system used to measure flange flatness of windmill towers and slewing bearings with an easy-to-use rotating laser. You can see the result as a 3D image in the display unit immediately after measuring and you can evaluate the result with different calculation settings.
- With SpinLaserTechnology™.
- Unique Flange Section measurement program included.
- Measures 1 to 5 circles of measurement points.
- Evaluate the result with advanced best-fit calculations directly on site.
- True 3D™ makes it easier to interpret the result.
E910 Flange
Easy-Laser® E910 Flange is a system used to measure flange flatness of windmill towers, wings and hubs, tower bases, etc. It can also be used for parallelism measurement.
- Unique Flange Section measurement program included.
- Measures 1 to 5 circles of measurement points.
- Evaluate the result with advanced best-fit calculations directly on site.
- True 3D™ makes it easier to interpret the result.
